Spindle maintenance

1. Clean the dust in the environment near the work area;

2. Regularly use the accessory brush to clean the dust at the front end of the spindle;

3. Please maintain the three-stage filtration effect for the side sealing air pressure and the top tool changing air pressure of the automatic tool change spindle;

4. The side sealing air pressure of the automatic tool changer spindle must be in an open state;

5. When the tool change air pressure on the top of the automatic tool change spindle is turned on to a certain value, the self-cleaning function of the spindle can be turned on (that is, the air pressure enters through the top tool change air inlet, and then enters the inner hole of the rotor, and the air is discharged from the front end of the inner hole of the rotor where the chuck is installed. , so as to clean the dust and other stains at the internal chuck).