1. When operating the woodworking lathe, the operator should wear protective glasses to prevent the sawdust from flying into the eyes and hurting the eyes.

2. Before starting the machine, carefully check all parts of the lathe, workpiece and fixture, and it should be flexible and reliable. When the workpiece is installed on the chuck, the workpiece should be clamped, the workpiece should be pushed tightly with the thimble, and the test run should be turned by hand.

3. When turning, the speed and feed of the lathe should be determined according to the size and hardness of the wooden workpiece. It is necessary to prevent the tool feed from being too large, which may cause the workpiece to pop out and hurt people.

4. Wood with nodules or cracks is not allowed to be turned on a lathe. Square wood must be machined into cylinders, which are then machined on a lathe.

5. During the turning process, it is not allowed to test the finish of the workpiece by hand. When grinding the workpiece, the tool holder should be removed first. When the lathe is in motion, no matter whether the power is off or not, it is forbidden to stop by hand braking.

6. The bonded wood must be placed for 24 hours to check that the bonding is firm and there are no cracks before it can be processed on the car.

The woodworking lathe has excellent performance. According to the survey, "people stop three shifts" can basically be achieved. But the premise is that timely maintenance must be carried out in accordance with the instructions.