With the rise of CNC machines, our working methods have undergone a great change. In the past, parts were adjusted manually in the process of operating parts. The size of the workpiece must be continuously measured, and the machine must be continuously adjusted manually, which not only works The efficiency is relatively low, and the labor intensity of the workers is relatively high. In the work, the technical requirements of the operators are also relatively high. After using the CNC lathe, we found that in the process of this operation, you will find that the operation The strength is effectively reduced, and the accuracy is improved, which brings a leap in the quality of workpiece processing.

It can be clearly felt that the accuracy and quality of the workpieces processed by CNC are stable, and the error of each batch of goods can also be well controlled. CNC wire-cutting machine tools improve the processing accuracy, and only need to enter the linkage operation in the data lathe Coordinates, the processing of more complex parts can show good results. In the process of processing, the quality stability of the workpiece has been greatly improved, the function of a single workpiece is good, and the quality of the entire batch of parts it’s the same. In the process of operation, if you need to change other processing programs, you can complete it with only one key operation, which saves a lot of production time.

Since the precision of the CNC lathe itself is relatively high when designing, and the rigidity is relatively large during processing, the production efficiency can be 2-5 times that of ordinary machine tools by selectively using this processing technology. In the process of processing, the degree of automation of the machine tool is effectively improved, the labor intensity of the workers is reduced, and the benefits of the workers are increased. At the same time, it can also bring more economic benefits to the development of the enterprise and reduce the operating cost of the enterprise.

(1) Highly flexible 　　
Machining parts on a CNC lathe mainly depends on the processing program. It is different from an manual lathe. There is no need to manufacture and replace many tools and fixtures, and there is no need to frequently adjust the machine tool. Therefore, CNC lathes are suitable for occasions where parts are frequently replaced. That is, it is suitable for single piece, small batch production and the development of new products, shortens the production preparation cycle, and saves a lot of process equipment costs.

(2) High machining accuracy　　
The machining accuracy of CNC machine can generally reach 0.005～0.1mm. CNC machine are controlled in the form of digital signals. Each time the CNC device outputs a pulse signal, the moving parts of the machine tool move by one pulse equivalent (usually 0.001mm), and the machine tool advances The average error of the backlash of the transmission chain and the lead screw pitch can be compensated by the numerical control device. Therefore, the positioning accuracy of the numerical control machine tool is relatively high.

(3) The processing quality is stable and reliable　　
To process the same batch of parts, on the same machine tool, under the same processing conditions, using the same tool and processing procedure, the cutting path of the tool is exactly the same, the parts have good consistency, and the quality is stable.

(4) High productivity　　
CNC lathe can effectively reduce the processing time and auxiliary time of the parts. The spindle speed and feed range of the CNC lathe are large, allowing the machine tools to carry out powerful cutting with large amounts of cutting. The CNC lathe are currently entering the era of high-speed machining. CNC lathe move parts. The rapid movement and positioning and high-speed cutting of the semi-finished product reduce the turnaround time between the processes of the semi-finished product and improve the production efficiency.

(5) Improve working conditions　　
After the CNC lathe is adjusted before processing, enter the program and start it, and the machine tool can automatically and continuously perform processing until the end of the processing. Operators are mainly engaged in program input, editing, loading and unloading of parts, tool preparation, observation of machining status, and parts inspection. The labor intensity is greatly reduced, and the labor of machine tool operators tends to be intellectual work. In addition, the cnc machine is generally closed processing, which is clean and safe.

CNC lathes have the following obvious characteristics:

1. Suitable for the processing of complex and special-shaped parts.

2. Realize computer control and eliminate manual error.

3. Accuracy compensation and optimized control can be realized through computer software.

4. Machining center, turning center, grinding center, electric machining center, etc. have tool magazine and tool change functions, which reduces the number of clamping times and improves machining accuracy.