1. Into pure water every week, when the water temperature in water in more than 40 degrees.
2. Pay attention to the cooling water temperature and air temperature difference is not too big, laser cutting bed of laser and optical lens are used water cooling way, because the water met with cold air will condense into ice, to a large extent affected the light efficiency of laser and optical lenses, through to the great influence on the service life of laser energy and optical accessories. It suggest the general laser laser cutter users to set temperature for 30 to 32 degrees, control the cooling water temperature and room temperature difference in temperature is greater than 7 degrees.

3. The summer temperature, the cooling system working pressure of laser cutting bed, it advice comes at a higher pressure before check the maintenance of the internal structure of the cooling machine, different manufacturers of equipment pressure is different also, we recommend before maintenance to refer to equipment manufacturer’s specific parameters.

4. The summer due to higher temperature, cooling water and ever faster metamorphism, suggested that the laser cutting bed users use formal distilled water or pure water, and regularly cleaned scale, lest cause to laser and the pipe scale affect laser power. The different types of laser cutting bed cleaning scale method is also different, please operate under the guidance of the equipment manufacturer.

5. Because of the metal laser cutter dust mainly metal powder, suggest that regular cleaning laser cutting bed dust in electric cabinet and check the working condition of the cooling fan.