I. Precautions before operation:

1. The operator must be familiar with the performance, structure and transmission system of the machine and master the operation procedure.

2. Before starting the equipment, check whether all parts are in good condition, perform lubrication work according to lubrication requirements, and check whether all pipe interfaces are solid.

3. Check whether the horizontal and vertical movement of the equipment frame, plasma cutting machine and cutting giant adjustment are flexible and normal.

Ii. Operational Considerations:

II. Operational Considerations:

1.Place the boards to be cut in a suitable position on the working table. The boards must not touch the tracks.

2. Make the program according to the drawings or software, cut the vehicle when necessary, and check whether the program is accurate.

3. When cutting work, start the plasma cutting machine first, find a good entry point, adjust the cutting parameters, open the air source, start the plasma cutting machine, enter the program control cutting.

4. When cutting, it is strictly prohibited to stand on the cut plate and rack track, and not to fiddle with the electrical components and transmission components.

5. Always keep the transmission rack, rail and transmission steel belt clean to ensure the operation accuracy.

6. Special attention should be paid to the clean maintenance of the operation and control platform, and the processing programming should be conducted under the guidance and assistance of the process technicians.

7. When using crane with lifting plate, the safety technical operation rules of crane operation and ground (hook) operation should be strictly observed and closely coordinated.

III. Matters needing attention when stopping:

1. Shut down the power supply of the rack moving control before closing the plasma cutting machine.

2. Cut off the power and air supply at the end of the work or after work, clean the equipment well, and do anti-rust work when not in use for a long time.

Because the new technology and new process are adopted in the design, the automatization of processing the taper tip of the leading small pipe is realized, which has the characteristics of low noise, easy operation, high efficiency and stable performance.Small catheter manufacturing process time end, smooth processing surface, workpiece without scars.The closed loop lubrication system can ensure the normal operation of the machine for a long time. The machine mold can be changed easily. The metal tube of different shapes can be processed simply by changing the mold, which can meet the different needs of various industries.